The A1011 specification is the Standard Specification for light gauge Hot-Rolled Sheet and Strip Carbon(CS and DS), Structural(SS), High-Strength Low-Alloy(HSLAS), High-Strength Low-Alloy with Improved Formability(HSLAS-F), and Ultra-High Strength(UHSS) steels in thicknesses up to 0.230"(6 mm) in coil form. General requirements for the grades covered in A1011 can be found in ASTM A568.
| Product Name | Dimensions | Datasheet |
|---|---|---|
| ASTM A1011 HSLAS Grade 45 |
T: 0.188 - 0.229 in W: 60 - 98 inT: 4.78 - 5.82 mm W: 1500 - 2500 mm |
|
| ASTM A1011 HSLAS Grade 50 |
T: 0.188 - 0.229 in W: 60 - 98 inT: 4.78 - 5.82 mm W: 1500 - 2500 mm |
|
| ASTM A1011 HSLAS Grade 55 |
T: 0.079 - 0.229 in W: 39.4 - 73.2 inT: 2.0 - 5.82 mm W: 1000 - 1860 mm |
|
| ASTM A1011 HSLAS Grade 60 |
T: 0.188 - 0.229 in W: 60 - 98 inT: 4.78 - 5.82 mm W: 1500 - 2500 mm |
|
| ASTM A1011 HSLAS Grade 65 |
T: 0.079 - 0.229 in W: 39.4 - 73.3 inT: 2.0 - 5.82 mm W: 1000 - 1860 mm |
|
| ASTM A1011 HSLAS Grade 70 |
T: 0.188 - 0.229 in W: 60 - 98 inT: 4.78 - 5.82 mm W: 1500 - 2500 mm |
|
| ASTM A1011 HSLAS-F Grade 50 |
T: 0.188 - 0.229 in W: 60 - 98 inT: 4.78 - 5.82 mm W: 1500 - 2500 mm |
|
| ASTM A1011 HSLAS-F Grade 70 |
T: 0.188 - 0.229 in W: 60 - 98 inT: 4.78 - 5.82 mm W: 1500 - 2500 mm |
|
| ASTM A1011 HSLAS F Grade 80 |
T: 0.087 - 0.229 in W: 60 - 98 inT: 2.2 - 5.82 mm W: 1500 - 2500 mm |
|
| ASTM A1011 SS Grade 36 |
T: 0.188 - 0.229 in W: 60 - 98 inT: 4.78 - 5.82 mm W: 1500 - 2500 mm |