ASTM A1011 HSLAS Grade 65
Download data sheet
Download data sheet
ASTM A1011 is a standard specification for hot-rolled, steel sheet and strip and coils of carbon steel, structural steel, high-strength low-alloy steel, high-strength low-alloy steel with improved formability, and ultra-high strength steel. The specification covers steel sheet, strip, and coils in thicknesses less than 0.230 in. A1011 High-Strength Low-Alloy Steel (HSLAS) Grade 65 has a specified minimum yield strength of 65 ksi.
| Grade | Product type | Thickness (inmm) |
Width (inmm) |
|---|---|---|---|
| HSLAS Grade 65 Class 1 | Coils | 0.079 - 0.2292.0 - 5.82 | 39.4 - 73.31000 - 1860 |
Tensile testing is performed in the longitudinal direction.
| Grade | Thickness (inmm) |
Yield strength (min ksi) |
Tensile strength (min ksi) |
Elongation in 2" 1) (min %) |
|---|---|---|---|---|
| HSLAS Grade 65 Class 1 | 0.079 - 0.2292.0 - 5.82 | 65 | 80 | 16 |
1) For thicknesses from 0.097 in. down to 0.079, the minimum Elongation is 14%.
(Heat analysis, wt. %.)
| Grade | C (max %) |
Mn (max %) |
P (max %) |
S (max %) |
Ti 1) (min %) |
V 1) (min %) |
Cb 1) (min %) |
Ni (max %) |
Mo (max %) |
Cu 2) (min %) |
Cr (max %) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| HSLAS Grade 65 Class 1 | 0.26 | 1.50 | 0.04 | 0.04 | 0.005 | 0.005 | 0.005 | 0.20 | 0.06 | 0.20 | 0.15 |
1) One or more of Cb, V, and Ti may be added. When added the min for that element applies, if not added then there is no minimum requirement.
2) Copper steel with 0.20% minimum Cu.