الصناعات والحلول

تعد أسطح المعدات التي يمكنها تحمل كل من التآكل الصدمي والتآكل الانزلاقي ضرورية لاستخراج المعادن والمواد ونقلها ومعالجتها وطحنها وإعادة تدويرها. باستخدام أجزاء Hardox® المقاومة للتآكل ومكونات التراكب Duroxite®، يمكننا إطالة عمر خدمة المعدات - أحيانًا بعامل من 2x إلى 4x.

Part of the re-engineering of an entire mining chute, featuring a Hardox® 500 shell with Hardox® 600 liners.

Part of the re-engineering of an entire mining chute, featuring a Hardox® 500 shell with Hardox® 600 liners.

Grizzly basket segments and bars made using Hardox® 450 and Hardox® 500 wear plate.

Grizzly basket segments and bars made using Hardox® 450 and Hardox® 500 wear plate.

Static grizzly made from Hardox® 500 wear plate, 50mm.

Static grizzly made from Hardox® 500 wear plate, 50mm.

Mining & quarrying

Mines and quarries are a big part of our business – and with good reason. We’re adept at handling aggressive abrasives on production-critical equipment, such as:

  • Grizzly baskets and static grizzlies
  • Chutes, both liners and entire structures
  • Hoppers
  • Skips and bins
  • Cone, jaw, and gyratory crushers
  • Vibrating and static screens and clamps
  • Trommel screens
  • Launders
  • Grinding Wheels
  • Hammer mills
  • Ball mills
  • Screw conveyors
  • Cyclones
  • Slurry pipelines
  • Excavator bucket rebuilds
  • Bucket cutting edges
  • Rammer jammer attachments
  • Dump truck liners and protective edges
Lamella plates for apron feeder at a cement plant made in Hardox® 450 wear plate.

Lamella plates for apron feeder at a cement plant made in Hardox® 450 wear plate.

Vertical shaft impact crusher rotor made from Hardox® 450 and Hardox® 600 wear plate.

Vertical shaft impact crusher rotor made from Hardox® 450 and Hardox® 600 wear plate.

Cement/concrete plants and trucks

The crushing, grinding, and mixing that goes into production of cement and concrete is notoriously abrasive on the plant’s wear components. To address extreme wear situations, we can use a combination of wear parts made of Hardox® wear plate and Duroxite® overlay for equipment such as:

  • Vertical roller mills (VRMs) components
  • Vertical shaft impact (VSI) parts
  • Lamella plates for apron conveyors
  • Chutes and hoppers
  • Planetary mixers: sides and bottom plates
  • Horizontal shaft mixers: liners, blades, and scrapers
  • Drum replacements for concrete trucks (transit mixers)
Refurbished refuse (garbage) compactor made from 4mm Hardox® HiAce wear plate

Refurbished refuse (garbage) compactor made from 4 mm Hardox® HiAce wear plate for protection against abrasive and acidic loads.

Screens and screen clamps made from Hardox® wear plate.

Screens and screen clamps made from Hardox® wear plate.

Trommel screens made from Hardox® wear plate.

Trommel screens made from Hardox® wear plate.

Waste management/recycling

Waste management and recycling requires compacting and/or shredding items that were designed to resist their destruction. The ingenious equipment made to repurpose waste have, understandably, numerous parts that are vulnerable to impact and abrasive wear. Let us help extend the life of your:

  • Crushers
  • Compactors
  • Trommel screens
  • Hammer mills
  • Screen drums
  • Shear shredders
  • Cyclones
  • Chute and hoppers
  • Scrap balers

Steel & aluminum mills

We offer wear upgrades for liner plates used on conveyors, feeders, chutes, and cones, as well as other wear components found in steel and aluminum mills. “Hot” applications can benefit from the use of Hardox® HiTemp wear plate.

With Hardox® HiTemp wear plate, mills have a cost-efficient solution for wear resistance at high temperatures in the 300° to 500°C range.

With Hardox® HiTemp wear plate, mills have a cost-efficient solution for wear resistance at high temperatures in the 300° to 500°C range.

Dredging

Hardox® Pipes and Duroxite® Pipes provide longer service life for the dredging of harbors, canals, or island-building applications.

 
Dredging pipe formed from Duroxite® 100 wear plate.

Dredging pipe formed from Duroxite® 100 wear plate.

Your wear application not listed here?

Please contact us anyway. We done some unusual applications, including a “bullet-collecting” wall at a rifle range. We are highly practical engineers, ready for your engineering and wear challenges.