LR AH/DH/EH 32

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page
Show specs in Imperial Metric

General Product Description

Lloyd’s Register Grades AH32, DH32 and EH32 are higher-strength structural steels with a specified minimum yield strength of 46 ksi and specified minimum Charpy V-notch impact toughness properties.

Applications

Typical applications include ships and other structural applications.

Available Dimensions

Hide/Show specific columns Edit
Select columns to display
    Grade Product type Thickness
    (inmm)
    Width
    (inmm)
    Length
    (inmm)
    Grade AH32 Plate 0.1875 - 1.504.762 - 38.1 72 - 1201800 - 3050 240 - 10206100 - 25910
    Grade DH32 Plate 0.1875 - 1.504.762 - 38.1 72 - 1201800 - 3050 240 - 10206100 - 25910
    Grade EH32 Plate 0.1875 - 2.364.762 - 59.9 60 - 131.91500 - 3350 73 - 5901900 - 15000
    Compare parameters

    Select one parameter to compare

    Comparison

      Width: Please inquire for plate widths less than 72 in. and inquire plate product over 120 in.

      Length: Please inquire for plate lengths outside the noted ranges.

      Thickness: Please inquire for plate thicknesses outside the noted ranges.

      Mechanical Properties

      Tensile testing is performed in the transverse direction.

      Hide/Show specific columns Edit
      Select columns to display
        Grade Thickness
        (inmm)
        Yield strength
        (min ksi)
        Tensile strength
        (ksi)
        Elongation A5 1)
        (min %)
        Grade AH32 0.1875 - 1.504.762 - 38.1 46 64 - 83 22
        Grade DH32 0.1875 - 1.504.762 - 38.1 46 64 - 83 22
        Grade EH32 0.1875 - 2.364.762 - 59.9 46 64 - 83 22
        Compare parameters

        Select one parameter to compare

        Comparison

          1) See Lloyd’s Register Rules for elongation requirements for alternative tensile specimens.

          Impact Properties

          Hide/Show specific columns Edit
          Select columns to display
            Grade Thickness
            (inmm)
            Test temperature
            (°F)
            Min Longitudinal Average Energy 1)
            (ft-lbs)
            Min transverse average energy 1)
            (ft-lbs)
            Grade AH32 0.1875 - 1.504.762 - 38.1 32 23 16
            Grade DH32 0.1875 - 1.504.762 - 38.1 -4 23 16
            Grade EH32 0.1875 - 1.974.762 - 50.0 -40 23 16
            Grade EH32 1.98 - 2.3650.3 - 59.9 -40 28 19
            Compare parameters

            Select one parameter to compare

            Comparison

              1) Tests are to be taken in the longitudinal direction. Normally, transverse test specimens are not required unless otherwise specified in the order. Generally, impact tests are not required when material thickness is less than 0.236 in.

              No more than one value below the specified minimum average energy but no less than 70% of the specified minimum average energy value.

              Minimum average energy for full-size specimens. Refer to Lloyd’s Register Rules for sub-size specimen energy requirements.

              Carbon Equivalent

              Hide/Show specific columns Edit
              Select columns to display
                Grade AH32 DH32 EH32 EH32
                Thickness (inmm) 0.1875 - 1.504.762 - 38.1 0.1875 - 1.504.762 - 38.1 0.1875 - 1.974.762 - 50.0 1.98 - 2.3650.3 - 59.9
                CEV 1) (max %) 0.36 0.36 0.36 0.38
                Compare parameters

                Select one parameter to compare

                Comparison

                  1) Carbon equivalent requirements for TMCP condition of supply only.