NV A/D/E 36

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page
Show specs in Imperial Metric

General Product Description

DNV Grades NV A36, NV D36, and NV E36 are high-strength structural steels with a minimum specified yield strength of 51 ksi and specified minimum Charpy V-notch impact toughness properties.

Applications

Typical applications include shipbuilding and mobile offshore drilling units and structures.

Available Dimensions

Hide/Show specific columns Edit
Select columns to display
    Grade Product type Thickness
    (inmm)
    Width
    (inmm)
    Length
    (inmm)
    NV A36 Plate 0.1875 - 1.574.762 - 39.9 72 - 1201800 - 3050 240 - 10206100 - 25910
    NV A36 Plate 1.58 - 2.0040.1 - 50.8 72 - 1201800 - 3050 240 - 6006100 - 15200
    NV D36 Plate 0.1875 - 1.574.762 - 39.9 72 - 1201800 - 3050 240 - 10206100 - 25910
    NV D36 Plate 1.58 - 2.0040.1 - 50.8 72 - 1201800 - 3050 240 - 6006100 - 15200
    NV E36 Plate 0.1875 - 0.7874.762 - 20.0 72 - 1201800 - 3050 240 - 10206100 - 25910
    NV E36 Plate 0.79 - 2.0020 - 50.8 72 - 1201800 - 3050 240 - 6006100 - 15200
    Compare parameters

    Select one parameter to compare

    Comparison

      Width: Please inquire for plate widths less than 72 in. and plate widths greater than 120 in.

      Length: Please inquire for plate lengths oustide the noted ranges.

      Thickness: Please inquire for plate thicknesses outside the noted ranges.

      Mechanical Properties

      Tensile testing is performed in the transverse direction.

      Hide/Show specific columns Edit
      Select columns to display
        Grade Thickness
        (inmm)
        Yield strength
        (min ksi)
        Tensile strength
        (ksi)
        Elongation A5 1)
        (min %)
        NV A36 0.1875 - 2.004.762 - 50.8 51 68 - 90 21
        NV D36 0.1875 - 2.004.762 - 50.8 51 68 - 90 21
        NV E36 0.1875 - 2.004.762 - 50.8 51 68 - 90 21
        Compare parameters

        Select one parameter to compare

        Comparison

          1) See DNV Rules for elongation requirements for alternative tensile specimens.

          Impact Properties

          Hide/Show specific columns Edit
          Select columns to display
            Grade Thickness
            (inmm)
            Test temperature
            (°F)
            Min Longitudinal Average Energy 1)
            (ft-lbs)
            NV A36 0.1875 - 2.004.762 - 50.8 32 25
            NV D36 0.1875 - 2.004.762 - 50.8 -4 25
            NV E36 0.1875 - 2.004.762 - 50.8 -40 25
            Compare parameters

            Select one parameter to compare

            Comparison

              1) Tests are to be taken in the longitudinal direction. Normally, transverse test specimens are not required unless otherwise specified in the order. Impact tests not required when material thickness is less than 0.236 in. unless otherwise specified.

              No more than one value below the specified miniminum average energy but no less than 70% of the specfied minimum average energy value.

              Minimum average energy for full-size specimens. Refer to DNV Rules for sub-size specimen energy requirements.

              Carbon Equivalent

              Hide/Show specific columns Edit
              Select columns to display
                Grade NV A36 NV D36 NV E36
                Thickness (inmm) 0.1875 - 2.004.762 - 50.8 0.1875 - 2.004.762 - 50.8 0.1875 - 2.004.762 - 50.8
                CEV 1) (max wt %) 0.38 0.38 0.38
                Compare parameters

                Select one parameter to compare

                Comparison

                  1) Carbon equivalent requirements for TMCP condition of supply only.