ASTM A572 Grade 42

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

On this page
Show specs in Imperial Metric

General Product Description

The ASTM A572 specification is the Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel for plates used in general construction and structural applications. ASTM A572 includes five grades with specified minimum yield strengths of 42, 50, 55, 60, and 65 ksi, respectively. For applications where notch toughness is important, consult SSAB for specific Charpy V-notch toughness requirements. ASTM A572 grades are used in a wide variety of structural applications in many market segments.

Available Dimensions

Hide/Show specific columns Edit
Select columns to display
    Grade Product type Thickness
    (inmm)
    Width
    (inmm)
    Length
    (inmm)
    ASTM A572 Grade 42 Mill Plate 0.188 - 6.004.78 - 152 60 - 131.91500 - 3350 120 - 10203050 - 25910
    ASTM A572 Grade 42 Temper Leveled Plate 0.100 - 0.6252.54 - 15.9 48 - 961200 - 2400 72 - 7201800 - 18300
    Coil for Conversion To 0.188 - 0.6254.78 - 15.9 60 - 961500 - 2400
    Compare parameters

    Select one parameter to compare

    Comparison

      Temper Leveled Plate: SSAB's Cut-To-Length facilities use the temper leveled coil (TLC) process to produce temper leveled plate products. For additional information concerning our temper leveling process, please refer to our SSAB Americas: North American Cut-to-Length Operations brochure located under the Downloads section of our Commercial Steels Overview page.

      Coil for Conversion To: Coils are excluded from qualification to this specification until they are processed into a finished plate product and all required processing, inspections, and testing are performed. Coils For Conversion To product will be certified to chemistry only. Coils will be subject to availability, so please inquire. Please inquire for coil dimensions outside the noted range. Slitting capabilities are determined by strength levels and thicknesses, so please inquire all slit coil opportunities.

      Mill Plate: Please inquire for plate dimensions outside the noted range.

      Mechanical Properties

      Tensile testing is performed in the transverse direction according to ASTM A6 requirements. The tensile propertyrequirements are tablulated below:

      Hide/Show specific columns Edit
      Select columns to display
        Grade Thickness
        (inmm)
        Yield strength
        (min ksi)
        Tensile strength
        (min ksi)
        Elongation in 2" 1)
        (min %)
        Elongation in 8" 1)
        (min %)
        ASTM A572 Grade 42 0.100 - 6.002.54 - 152 42 60 24 20
        Compare parameters

        Select one parameter to compare

        Comparison

          1) For plates wider than 24 in., the elongation requirement is reduced two percentage points. Additional elongation requirement adjustments are allowed per the Tension Tests section of Specification ASTM A6.

          Tolerances

          Tolerances for Mill Plate:
          Thickness, width and length tolerances for A572 Grade 42 plates are in accordance with ASTM A6. ASTM A6 Half-Standard Flatness tolerances are available for plate thicknesses of 3/8 inches to 3.0 inches. Inquire for specific mill flatness capabilities.

          Tolerances for Temper Leveled Plate:
          Thickness, width and length tolerances for A572 Grade 42 plates are in accordance with ASTM A6. ASTM A6 Half-Standard Flatness tolerances or better are available for temper leveled plates. Flatness capabilities are determined bythe processing line and the minimum yield strength of the material.

          Tolerances for Coils for Conversion To:
          For minimum gauge orders, thickness and width tolerances are in accordance with the respective ASTM specifications of A568 for thicknesses of less than 0.230 inches(exclusive), and A635 for thicknesses of 0.230 inches to 1.00 inch, inclusive. Thickness tolerances are in accordance with Table S1.1 found in each of the ASTM specifications of A635 and A568, respective of thickness. Width tolerances are in accordance with Table 6 of ASTM A568 and Table 3 of ASTM A635. Thickness tolerances for nominal gauge orders must be inquired.

          All tolerances will be confirmed to the customer via SSAB's Order Acknowledgement document.