Strenx 1100MC

Strenx® 1100MC

Download data sheet

Select Language

Get datasheet by email
Close

Get datasheet by email

Please visit SSAB’s privacy statement for more information on how we process personal data.
    Show specs in Metric Imperial

    General Product Description

    The high-strength structural steel at 1100 MPa

    Strenx® 1100MC is a hot-rolled structural steel made for cold forming, with a minimum yield strength of 1100 MPa for stronger and lighter structures.

    These cut-to-length sheets feature excellent thickness accuracy and surface quality in relation to strength level, providing an outstanding finish to the final products. Typical applications include a wide range of parts and components such as demanding load-bearing structures. 

    Dimension Range

    Strenx® 1100MC is available as cut to length sheets with mill edge in thicknesses of 3.00 - 8.00 mm, widths up to 1700 mm and lengths up to 16 meters.

    Mechanical Properties

    Hide/Show specific columns Edit
    Select columns to display
      Thickness
      (mmin)      		 Yield strength ReH 1)
      (min MPaksi)      		 Tensile strength Rm
      (MPaksi)      		 Elongation A5
      (min %)      		 Min. inner bending radius for a 90° bend 2)
      3.00 - 8.000.118 - 0.315 1100160 1250 - 1450181 - 210 7 4.0 x t
      Compare parameters

      Select one parameter to compare

      Comparison

        The mechanical properties are tested in the longitudinal direction.

        1) If ReH is not applicable then Rp0.2 is used.

        2) For both longitudinal and transverse direction.

        Impact Properties

        Hide/Show specific columns Edit
        Select columns to display
          Product Min. impact energy for longitudinal testing,
          Charpy V 10x10 mm test specimen 1)
          Strenx® 1100MC 27 J / -40 °C20 ft-lbs / -40 °F
          Compare parameters

          Select one parameter to compare

          Comparison

            Product
            Strenx® 1100MC
            Min. impact energy for longitudinal testing,
            Charpy V 10x10 mm test specimen 1)
            27 J / -40 °C20 ft-lbs / -40 °F

            1) Impact testing according to EN ISO 148-1 is performed on thicknesses ≥ 6mm. The specified minimum value corresponds to a full-size specimen.

            Chemical Composition (ladle analysis)

            Hide/Show specific columns Edit
            Select columns to display
              C *)
              (max %)              		 Si *)
              (max %)              		 Mn*)
              (max %)              		 P
              (max %)              		 S
              (max %)              		 Al
              (min %)
              0.15 0.50 1.80 0.020 0.005 0.015
              Compare parameters

              Select one parameter to compare

              Comparison

                The steel is grain refined.

                In addition Nb, V, Cr, Mo, B and Ti may be used.

                Carbon Equivalent CET(CEV)

                Hide/Show specific columns Edit
                Select columns to display
                  Thickness (mmin) 3.00 - 8.000.118 - 0.315
                  Typ CET(CEV) 0.33 (0.56)
                  Compare parameters

                  Select one parameter to compare

                  Comparison

                    Thickness (mmin)
                    Typ CET(CEV)
                    3.00 - 8.000.118 - 0.315
                    0.33 (0.56)
                    CET and CEV formula

                    Tolerances

                    More details are given in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.

                    Thickness

                    Tolerances according to Strenx® Thickness Guarantee.

                    Strenx® Guarantees offer considerably narrower thickness tolerances compared to EN 10051. 

                    Length and Width

                    Width and length tolerances according to SSAB standard.

                    SSAB standard offer narrower width and length tolerances compared to EN 10051.

                    Length tolerances only apply for cut to length sheets.

                    Shape

                    Tolerances according to EN 10051. Narrower tolerances according to the SSAB standard are available on request.

                    Flatness

                    Tolerances according to Strenx® Flatness Guarantee Class A.

                    Strenx® Flatness Guarantee offer narrower tolerances compared to EN 10051.

                    Flatness guarantees only apply for cut to length sheets. 

                    Surface Properties

                    According to EN 10163-2 Class A, Subclass 3.

                    Delivery Conditions

                    Thermomechanically Rolled. Strenx® 1100 MC is available in as rolled surface condition.

                    Delivery requirements can be found in SSAB’s brochure Strenx® Guarantees or on www.ssab.com.

                    Fabrication and Other Recommendations

                    Welding, bending and machining

                    Strenx® 1100MC has good welding, cold forming and cutting performance.

                    Strenx® 1100MC is not suited for applications requiring hot working or heat treatments at temperatures above 200°C since the material then may lose its guaranteed properties.

                    For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

                    Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.