ASTM A283 Grade C
Download data sheet
ASTM A283 Grade C is a specification for low and intermediate tensile strength carbon steel plates of structual quality for general applications. ASTM A283 Grade C has a specified minimum yield strengths of 30 ksi.
|A283 Gade C||Mill Plate||0.188 - 2.00||72 - 120||120 - 1020|
|A283 Gade C||Temper Leveled Plate||0.100 - 0.625||48 - 96||72 - 1020|
|—||Coil for Conversion To||0.188 - 0.625||60 - 96||—|
Temper Leveled Plate: SSAB's Cut-To-Length facilities use the temper leveled coil (TLC) process to produce temper leveled plate products. For additional information concerning our temper leveling process, please refer to our SSAB Americas: North American Cut-to-Length Operations brochure located under the Downloads section of our Commercial Steels Overview page.
Coil for Conversion To: Coils are excluded from qualification to this specification until they are processed into a finished plate product and all required processing, inspections, and testing are performed. Coils For Conversion To product will be certified to chemistry only. Coils will be subject to availability, so please inquire. Please inquire for coil dimensions outside the noted range. Slitting capabilities are determined by strength levels and thicknesses, so please inquire all slit coil opportunities.
Mill Plate: Please inquire for plate dimensions outside the noted range.
Tensile testing is performed in the tranverse direction. Tensile property requirements are tabulated below:
|Elongation in 2" 1)
|Elongation in 8" 1)
|A283 Gade C||0.100 - 2.00||30||55 - 75||25||22|
1) For plates wider than 24 in., the elongation requirement is reduced two percentage points. Additional elongation requirement adjustments are allowed per the Tension Tests section of Specification ASTM A6.