180

You are currently visiting the SSAB group site

To go to your country specific site please follow this link:

SSAB Laser® 275C

Advanced hot rolled structural steel for cold forming, optimized for laser cutting, with a minimum yield strength of 275 MPa.

SSAB Laser® 275C is nicely positioned between SSAB Laser® 250C and SSAB Laser® 355C and could be just the steel you need for your products. SSAB Laser® 275C is the result of total production process control. Its consistent chemical composition, with low sulphur, phosphorous and silicon and the perfected hot rolling process result in a uniform and smooth microscale surface for optimal laser cutting.

SSAB Laser® 275C is dead-flat. Flatness, before and after laser cutting, is guaranteed to ≤ 3.0 mm/m.

SSAB Laser® 275C meets and exceeds the requirements of EN 10025-2 for S275J2C+N. Dual material certification and CE marking is available upon request. The SSAB Laser® dimensional tolerances exceed the requirements of EN 10051 for hot rolled sheet and EN 10029 for thot rolled plate.

The SSAB Laser® product family consists of hot rolled plate and sheet and cold rolled sheet with yield strength levels up to 460 MPa. All products benefit from superior steel cleanliness, well balanced and consistent chemistry, optimized for laser cutting and narrow and consistent dimensional tolerances


Dimension Range

SSAB Laser® 275C is available in thickness 2.00 - 30.00 mm and widths up to 1860 mm as cut to length and 3300 mm as plate. Length up to 16 meters as cut to length and 15 meters as plate.

Available Standards

EN 10025-2

EN 10051

EN 10029

SSAB Laser® 275C

SSAB Laser® 275C

USED FOR
DIMENSIONS
STANDARDS
DATA SHEET
USED FOR

Laser cutting

Structural

DIMENSIONS

T: 2 - 30 mm

W: Up to 3300 mm

L: Up to 16000 mm

STANDARDS

EN 10025-2

EN 10051

EN 10029

DATA SHEET