Docol® PHS 1800 press hardening

More about press hardening steel

Download data sheet

Select Language

Get datasheet by email

Company E-mail address

Country

Please visit SSAB’s privacy statement for more information on how we process personal data

General Product Description

Docol PHS 1800 is cold rolled and alloyed with a small percentage of boron to improve hardenability. This steel is specially developed for parts and components that are manufactured by direct or indirect hot stamping. Applications include safety parts such as door impact beams, bumper systems and B- pillar reinforcements.

Dimension Range

Cold rolled / UC: thickness 0.70-3.00 mm, width up to 1500 mm.

Slit strip and cut to length sheets are available upon request.

Mechanical Properties

Hide/Show specific columns Edit

Select columns to display

	Standard	Condition	Test direction	Typical yield strength R_p0.2 (MPa)	Typical tensile strength R_m (MPa)	Typical elongation A₈₀ (%)
Docol PHS FH 1800	SSAB	Full Hard	T	970	1070	4
Docol PHS CR 1800	SSAB	As delivered Annealed	T	350	500	27
Docol PHS CR 1800	SSAB	Hot stamped ¹⁾	T	1300	1800	6

Compare parameters

Select one parameter to compare

Condition

Test direction

Typical yield strength R_p0.2
(MPa)

Typical tensile strength R_m (MPa)

Typical elongation A₈₀
(%)

Docol PHS FH 1800

Standard

SSAB

Condition

Full Hard

Test direction

Typical yield strength R_p0.2
(MPa)

970

Typical tensile strength R_m (MPa)

1070

Typical elongation A₈₀
(%)

Expand Collapse

Docol PHS CR 1800

Standard

SSAB

Condition

As delivered Annealed

Test direction

Typical yield strength R_p0.2
(MPa)

350

Typical tensile strength R_m (MPa)

500

Typical elongation A₈₀
(%)

Expand Collapse

Docol PHS CR 1800

Standard

SSAB

Condition

Hot stamped ¹⁾

Test direction

Typical yield strength R_p0.2
(MPa)

1300

Typical tensile strength R_m (MPa)

1800

Typical elongation A₈₀
(%)

Expand Collapse

¹⁾ Properties depend on the process.

Chemical Composition (ladle analysis)

Hide/Show specific columns Edit

Select columns to display

C (%)	Si (%)	Mn (%)	P (max %)	S (max %)	Cr (max %)	B (%)
0.27 - 0.33	0.15 - 0.35	1.00 - 1.45	0.025	0.010	0.35	0.0008 - 0.0050

Compare parameters

Select one parameter to compare

Si
(%)

Mn
(%)

P
(max %)

S
(max %)

Cr
(max %)

B
(%)

C
(%)

0.27 - 0.33

Si
(%)

0.15 - 0.35

Mn
(%)

1.00 - 1.45

P
(max %)

0.025

S
(max %)

0.010

Cr
(max %)

0.35

B
(%)

0.0008 - 0.0050

Expand Collapse

Tolerances

Cold rolled (UC): Tolerances in accordance to EN 10131.

Customized dimensional and shape tolerances are available upon request.

Surface Treatments

Uncoated (UC): available as oiled.

All surface treatments are in accordance with RoHS directive (2011/65/EU) and do not contain Chromium VI (Cr⁶⁺). Surface treatments provide only temporary surface protection during transportation and storage. In order to avoid corrosion damages, care must be taken to keep the products dry during transportation and storage. If they become wet, they must be separated and situated so that they are dried quickly.

Fabrication and Other Recommendations

For information concerning fabrication, see SSAB´s brochures on www.ssab.com or consult Tech Support.

Appropriate health and safety precautions must be taken when bending, welding, cutting, grinding or otherwise working on the products.

Docol® PHS 1800 press hardening

General Product Description

Dimension Range

Mechanical Properties

Select one parameter to compare

Chemical Composition (ladle analysis)

Select one parameter to compare

Tolerances

Surface Treatments

Fabrication and Other Recommendations

Docol® PHS steel product offer

Docol® PHS 1500 press hardening